Semi-autonomous driving increases the demand for safety solutions in comfort positions. New e.Locking, which is the electrification of the sensor and release system, enables easier structural integration of the seatbelt into the seat and offers advantages in design and production.
12 Dec 2024 | 6088 Views | By Autocar Professional Bureau
Semi-autonomous driving has led to an increased demand for safety solutions in comfort positions. ZF LIFETEC has announced development of e.Locking, the electrification of the sensor and release system.
This technology allows easier structural integration of the seatbelt into the seat, resulting in significant advantages in both design and ...
This is an Autocar Pro Plus article. Subscribe to continue reading.
Semi-autonomous driving has led to an increased demand for safety solutions in comfort positions. ZF LIFETEC has announced development of e.Locking, the electrification of the sensor and release system.
This technology allows easier structural integration of the seatbelt into the seat, resulting in significant advantages in both design and production. In the event of a sudden deceleration, the belt reel is mechanically locked so that the belt cannot be unfastened or can only be unfastened against the action of a force limiter. When the driver and passenger are in an upright nominal seating position, the combination of belt, retractor and force limiter reduces the consequences of hard braking or a crash.
Every driver has experienced it: when you pull the seatbelt quickly, it locks and cannot be pulled any further. This restraint function is important in the event of an imminent crash to ensure controlled restraint of the occupants. Until now, two redundant mechanical systems directly on the retractor were required to lock the seat belt. In order to protect occupants in new seating concepts, ZF LIFETEC is now introducing a new electromechanical system to series production.
The electrification of the sensor and triggering system is a key function in the latest ACR8.S seatbelt retractor series and offers significantly more design freedom and more comfort for the occupants. It will also be available as an option for the other ACR8 and SPR6 generations. With this new development, ZF LIFETEC is responding to a megatrend in automotive engineering: If autonomous driving functions become more widespread in the future, new seating concepts will become attractive that allow the occupants to adopt a resting position. This requires the seatbelt to be integrated into the seat – which is made much easier by the new e.Locking system from ZF LIFETEC.
Mechanical trigger function with compromises
One mechanical sensor responds to the acceleration of the belt spool movement. The other mechanism detects the acceleration of the entire vehicle. Typically, a ball sensor is used. In the event of a sudden acceleration or deceleration of the vehicle, the inertial body in the form of a ball, preferably a solid steel ball, moves and causes the latch lever to oscillate. This can, for example, cause a clutch pawl to engage with the clutch teeth of a locking mechanism, ultimately blocking the belt spool and preventing the belt from being pulled out.
"The steel ball sensor in particular requires the retractor to be mounted outside the seat, ideally in the vehicle's B-pillar," explains Harald Lutz, Senior Vice President Global Engineering at ZF LIFETEC. However, this design makes it difficult to integrate the belt into the seat. And this could be in greater demand in the future. Trends that can already be seen are driver and front passenger seats that also allow a so-called relax position, i.e. a flatter position of the occupants, relatively far away from the dashboard – and the B-pillar. Such seating positions are likely to be in greater demand in future model series, as they temporarily enable highly automated and autonomous driving. "To ensure that occupants in these positions are optimally protected by a seat belt system, an integrated belt system is required. We have now made this much easier with our e.Locking function," explains Lutz.
The new e.Locking system, available in the seat-integrated ACR8.S belt retractor from ZF LIFETEC, replaces the 12 to 13 millimetre steel ball previously used with an electromagnetic coil that locks the retractor electromechanically via a signal from a central ECU. The vehicle's acceleration, deceleration, and tilt are measured centrally by sensors in an ECU, evaluated by an algorithm, and a signal is sent to the coil when the belt retractor should be mechanically locked.