In benchmarking tests, the new alloy provides between three and five times the component life of established as-cast materials in modern, highly loaded, diesel engines.
14 Aug 2015 | 8815 Views | By Autocar Pro News Desk
Federal-Mogul Powertrain, a division of Federal-Mogul, has developed a new premium diesel piston aluminium alloy, called DuraForm-G91.
In benchmarking tests, the new alloy provides between three and five times the component life of established as-cast materials in modern, highly loaded, diesel engines. The increased strength of the new material ...
This is an Autocar Pro Plus article. Subscribe to continue reading.
Federal-Mogul Powertrain, a division of Federal-Mogul, has developed a new premium diesel piston aluminium alloy, called DuraForm-G91.
In benchmarking tests, the new alloy provides between three and five times the component life of established as-cast materials in modern, highly loaded, diesel engines. The increased strength of the new material also supports higher mechanical loads, allowing engines to operate at higher specific power and more efficiently.
The enhanced alloy properties facilitate piston designs with a lower compression height and reduced mass. The resulting benefits of less reciprocating mass and smaller, lighter cylinder blocks contribute to vehicle CO2 emissions reduction.
"This is an example of the enabling technologies developed by Federal-Mogul Powertrain that help our customers to make each new engine generation more compact, lighter and with a smaller carbon footprint than its predecessor," said Gian Maria Olivetti, Chief Technology Officer, Federal-Mogul Powertrain. "With our materials scientists at the technological forefront of the industry, we are committed to developing advanced new concepts for both aluminium and steel-based pistons for diesel vehicles, offering perfect fit solutions for the various needs of our customers."
DuraForm-G91's composition delivers increased fatigue strength, particularly in the high temperature range typically associated with highly loaded diesel pistons. "The improved silicon and intermetallic morphology provides a microstructure with increased resistance to complex thermomechanical loading, while maintaining the required thermo-physical properties, such as expansion, density and thermal conductivity," explained Dr. Frank T. H. Dörnenburg, Director of Technology, Global Pistons, Federal-Mogul Powertrain.
DuraForm-G91 has been developed using advanced testing techniques that shorten the validation period to production readiness. "We have employed specially designed accelerated base engine tests combined with 'engine-like' rig testing procedures," said Roman Morgenstern, specialist, Material Development and Characterisation, Global Pistons, Federal-Mogul Powertrain. "Engine-like rig testing combines thermomechanical fatigue (TMF) with high cycle mechanical fatigue (HCMF), which directly reflects the fatigue-critical load conditions seen by automotive diesel pistons in the engine."
TOP-NOTCH PERFORMANCE
In both engine testing and TMF-HCMF testing, DuraForm-G91 demonstrated three to five times the fatigue life of current as-cast alloys. During isothermal high cycle mechanical fatigue testing at temperatures above 350degC, the improvement was even more pronounced, at over eight times the life.
Additional engine testing has shown wear rates equal to those of the best current aluminium-silicon based piston materials. Extensive casting development trials have been carried out to deliver consistently high material integrity and optimize the casting parameters. With internal engine development testing almost complete, the first sample pistons have been released to customers for evaluation. The technology can be applied to light-duty and heavy-duty diesel pistons.
"Federal-Mogul Powertrain's technology laboratories have developed world-class manufacturing, engine and engine-like (superimposed TMF-HCMF) bench testing procedures and resources," said Morgenstern. "These facilities help us to acquire knowledge more quickly and in greater depth, leading to faster and more efficient alloy development."
Federal-Mogul Powertrain's DuraForm-G91 technology and other piston developments will be displayed at the IAA Show (Stand E21 in Hall 4.1) from September 15-18.