The Hamilton Scotts Apartments are one of the best residential addresses the city-state of Singapore has to offer.
19 Nov 2014 | 3932 Views | By Autocar Pro News Desk
The Hamilton Scotts Apartments are one of the best residential addresses the city-state of Singapore has to offer. Residents of the 30-storey condominium can park their luxury cars directly in front of their apartment. This is enabled by a fully automated parking lift sytem of Wöhr, which employs ContiTech timing ...
This is an Autocar Pro Plus article. Subscribe to continue reading.
The Hamilton Scotts Apartments are one of the best residential addresses the city-state of Singapore has to offer. Residents of the 30-storey condominium can park their luxury cars directly in front of their apartment. This is enabled by a fully automated parking lift sytem of Wöhr, which employs ContiTech timing belts.
Residents of the Hamilton Scotts Apartments do not park in front of the building or in a garage, but take their vehicles to the floor they live. Through a large glass pane, they can marvel at their vehicles in the ‘Sky Garage’ from their sofa, while at the same time, they can let their eyes wander over the Asian metropolis.
While the residents reach their apartments by a passenger elevator, the parking lift takes their cars over at an access point at the ground floor in order to carry and park them in front of the particular apartment. This solution is not only exclusive, it also offers excellent space efficiency: “While underground parking requires extensive ramps and driving lanes, the parking lift system uses the existing space in the manner of a high bay,” says Andreas Zangerle, Development Manager of Wöhr.
Extra long belts
The belts that lift the vehicles up to a height of 370 feet come from ContiTech. “For very high parking lifts, timing belts are our first choice,” says Zangerle. For the first time, they were used in 2006 for the parking systems in two 170 feet high towers in Mumbai, India.
For the project in Singapore, Wöhr has ordered 6,600 feet of the timing belt Conti Synchrodrive, in single lengths around 400 feet. “It is actually a standard belt”, says Thomas Winkler from the Application Engineering of ContiTech Power Transmission Group. “But it has never been installed in such lengths before”. Usually, the belt is used in industrial lifting applications, where differences between 30 to 100 feet must be bridged.
Large weights are not a problem for the Conti Synchrodrive – it features steel cord, the strongest tension member in the ContiTech belt portfolio. But the belt provides other important characteristics as well, which are important for the project: A noise-reducing cover fabric makes it anti-static. “This protects the control electronics of the parking lift and can prevent disturbances in its operation,” says Winkler. In addition, the tension member has been optimized: it offers a very low elongation and an improved setting behaviour, which is important for the length required in Singapore.
Smooth parking
The cars are lifted on parking pallets. “The quick-change pallet system allows very speedy access, so that parking and exiting functions takes place smoothly and fast,” explains Zangerle. The car elevator lifts up to 10 tonnes upward with a speed of 9 feet per second. The elevator platform measures approximately 20 by 20 feet, it is supported by two timing belts at each corner.
“Of course, a rope or chain drive would have been a cheaper solution for the parking lift,” says Winkler. But that applies only to the purchase. Due to the much lower maintenance costs of the belt – for example, lubrication is unnecessary – and their longer lifespan, belts are the more effective solution by far. Also, the noise level is kept within narrow limits, so that residents are not disturbed. And the teeth of the belt prevent slippage, so that the parking lift comes to stop where it is supposed to, without complex position control.